1, strict control of the retreaded tire uses
For retreading tires shall be mounted on the rear axle, in order to ensure traffic safety.
2, good tire pressure control
When tire pressure is below standard, radial degeneration of the larger tires on both sides over warpage, easy cord fatigue damage in the drive. Tread easy hard objects embedded in the road caused by mechanical action.
When the tire pressure is too high, leading to excessive tire cord access, excessive stress of steel cord, tire burst. Meanwhile, tire pressure is too high, can also affect the car ride, speed up auto parts early damage of vehicle vibration and consume a lot of fuel.
When set tire pressure should be maintained. Usually the front wheel and rear wheel, spare tire air pressure standards are not the same, we must strictly follow in the manual provided by the manufacturer of the vehicle's tire pressure data. Paste the pressure value of wings or driving in the car interior. Always check the pressure with accurate barometer. Detect tire pressure tire cooling conditions. Periodically check the valve cap to prevent leakage and damage. Ensure that the use of qualified valve caps. Correctly for the tires the most important factor is to ensure that the tires are the best. Hyperinflation will cause excessive tire carcass ply tension, fatigue, and thus are more likely to break or cut. Underinflated tires deformation may be excessive overheating, eventually leading to decomposition of matrix and the scrap tire.
3, pay attention to tire temperature
Tire temperatures are determined by load, speed and environmental temperature.
Tire temperature is too high, can seriously affect the life of the tire, it will make rubber, and will also result in carcass ply delamination, cause tire damage.
For the hot summer months, we can reduce the load and lower speeds to reduce the tire temperature rises.
4, science drive
Driving the vehicle, all involving the tires and the ground forces, improve the operation quality of driver training is reducing consumption and essential to improving security measures. High speed, aggressive acceleration and steering, power brakes will wear the tread rubber. High speed tires in collision risk much more than slow. Even if the tire pressure is correct, tires encounter foreign object damage than slow speeds when the road even more.
