Jiefang 485 Half Shaft Oil Seal 84×161×17.8mm
| Product name | Product number (specification) |
Applicable models |
location | Product Benefits | Product Advantages | |
| Jiefang 485 Half Shaft Oil Seal | 84×161×17.8 | Suitable for a wide range of FAW Jiefang models, including Jiupingchai, Aowei, Hummingway, New Dawei and J6 series. | Mounted on a solid axle between the differential output and the wheels | Outstanding sealing effect, excellent abrasion resistance, high temperature resistance, corrosion resistance, oil resistance, and pressure strength. | The skeleton oil seal manufactured using advanced vacuum vulcanization technology achieves a firm combination of rubber and skeleton materials, ensuring the stability and durability of the oil seal structure. Equipped with high-performance springs to improve the sealing and lubrication performance of the oil seal in the rotating shaft, ensuring that the oil chamber is isolated from the external environment. It can not only prevent the oil or water-chemical solution inside the mechanical equipment from leaking out, but also protect the internal components from damage caused by the intrusion of external dust and sand. | |
Solid shaft between differential output and wheel
The Liberty 485 Half Shaft Oil Seal is mounted on the solid shaft between the differential output and the wheels. Specifically, the half shaft is the solid shaft that connects the differential output to the wheels, and the half shaft oil seal is located on this shaft.
Procedure for replacing the half-shaft oil seals
Remove the tyres and shock absorbers: no matter which side of the half-shaft the seal is replaced on, it is necessary to remove the tyres and shock absorbers, and then take down the half-shaft in order to replace it.
Clean the old seal: the old seal is usually stuck in the differential interface, simply snap it out and install the new seal.
Clean the sludge: Thoroughly cleaning the sludge is not only for a clean appearance, but also makes it easier to see if the new seals are leaking.
Install the new oil seal: Use a one-pronged screwdriver to pry out the old oil seal, and then install the new half-axle oil seal.
By following these steps, you can effectively replace the Liberty 485 half shaft oil seal, ensure its proper installation and reduce the risk of oil leakage.
Hot Tags: oil seal 84×161×17.8 suppliers China, factory, cheap, low price, discount
